Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R22 Replacement, R422B, #1 Drop-In, Ok If Inadvertently Mixed with
R22, Kit B3
An acceptable and safe alternative/replacement for R22.
Our listing is for a 7.5 Lb. Tank Of Refrigerant R422b.
(1) ES Part# 5075, Service port repair kit that includes a professional dual size valve core tool, two brass caps with rubber gaskets and two replacement valve cores also known as schrader valves!
(1) ES Part# 3272 Gauge Kit.
R22 single manifold gauge set for use with this tank
Our Set includes:
1 each R22 single manifold gauge set
2 each 36″ hoses
(1) Low-Loss, Anti-Blow Back fitting, prevents frost bite when hose is disconnected from syste and also saves refrigerant loss.
(1) Model# 4015, Pittstop Pro Series Vacuum Pump 2.6 CFM
**This professional refrigeration and air conditioning system,  2.6 CFM vacuum pump,  is used to evacuate any air and non-condensibles from the system prior to charging the system with refrigerant.
The vacuum pump is not intended to recover the refrigerant from a system, that would be a “refrigerant recovery unit”.
The vacuum pump is used only AFTER the A/C system is empty of refrigerant or on a new installation and is used to pull a vauum on the system to remove air and all non-condensibles prior to charging with refrigerant.
This professional vacuum pump will work with R12, R22, R134a, R410, 404, 407, 409, 502, A/C & Refrigeration systems.
Complete with a 1-Year Warranty
Applications include:
Refrigeration
Air Conditioning (including automotive applications)
Medical appliances
Printing Machinery
Vacuum Packing
Gas-analysis and hot-forming plastics.
FEATURES:
Rotary
High Efficiency
Low Noise
Preventing Oil Return
Perfect Appearance
Good for up to 29″ At Sea Level
120 watt motor
RPM: 1720
Voltage: 110 V, 60HZ.
Weight: 15 lbs. or 6.9 (kg)
INTAKE FITTING: 1/4″ R12 systems or 1/2″ ACME R134a systems.
Features
ONE-YEAR WARRANTY
Oil fill cap
Exhaust Cap
Exhaust Port
Oil Full mark indicator
Oil sight glass for monitoring oil levels.
Oil Drain Plug
Inlet fittings for R12/R134a
On/Off Switch
Line cord 110 vac
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
If you inadvertently mix R422B with
R22 there will be no harm to the system components or
system efficiency.
Actually there will be an improvement in oil return and operating pressures.
We know this to be true because in Europe, where
there are
no regulations against mixing refrigerants, our European
sister company has tracked these developments.
***In the USA, the EPA does not permit or condone the
intentional mixing of refrigerants.
This listing is for a 7.5 Lb. Tank Of Refrigerant R-422b
Refrigerant R422b is the NUMBER 1 “DROP-IN” replacement for R22.
It works even better than R22 and is much more reasonable in cost.
There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has.
It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler.
Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement “DROP-IN” for R22.
If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a “DROP-IN” replacement.
All that is required that you install the new label on the equipment.
This listing includes a EPA approved R422b bael/ sticker.
Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system.
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene.
Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop.
(1) 7.5 lb. R422b. Factory Sealed Can.
The hose connection is standard, 1/4″ male flare.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
** Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
*They will ask you what the item is (refrigerant) and the “cost” not including shipping.
Thank you!
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a “Hazardous Materials Package” with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including “ORMD” Limited Quantities Exemption shipments.
An acceptable and safe alternative/replacement for R22. Our listing is for a 7.5 Lb. Tank Of Refrigerant R422b. (1) ES Part# 5075, Service port repair kit that includes a professional dual size valve core tool, two brass caps with rubber gaskets and two replacement valve cores also known as schrader valves! (1) ES Part# 3272 Gauge Kit. —R22 single manifold gauge set for use with this tank —Our Set includes: ——1 each R22 single manifold gauge set ——2 each 36″ hoses ——(1) Low-Loss, Anti-Blow Back fitting, prevents frost bite when hose is disconnected from syste and also saves refrigerant loss. ——(1) Model# 4015, Pittstop Pro Series Vacuum Pump 2.6 CFM —— **This professional refrigeration and air conditioning system, 2.6 CFM vacuum pump, is used to evacuate any air and non-condensibles from the system prior to charging the system with refrigerant. The vacuum pump is not intended to recover the refrigerant from a system, that would be a “refrigerant recovery unit”. The vacuum pump is used only AFTER the A/C system is empty of refrigerant or on a new installation and is used to pull a vauum on the system to remove air and all non-condensibles prior to charging with refrigerant. This professional vacuum pump will work with R12, R22, R134a, R410, 404, 407, 409, 502, A/C & Refrigeration systems.Complete with a 1-Year Warranty Applications include: Refrigeration ———Air Conditioning (including automotive applications) ———Medical appliances ———Printing Machinery ———Vacuum Packing ———Gas-analysis and hot-forming plastics. FEATURES: ———Rotary ———High Efficiency ———Low Noise ———Preventing Oil Return ———Perfect Appearance ———Good for up to 29″ At Sea Level ———120 watt motor ———RPM: 1720 ———Voltage: 110 V, 60HZ. ———Weight: 15 lbs. or 6.9 (kg) INTAKE FITTING: 1/4″ R12 systems or 1/2″ ACME R134a systems. Features ———ONE-YEAR WARRANTY ———Oil fill cap ———Exhaust Cap ———Exhaust Port ———Oil Full mark indicator ———Oil sight glass for monitoring oil levels. ———Oil Drain Plug ———Inlet fittings for R12/R134a ———On/Off Switch ———Line cord 110 vac *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) If you inadvertently mix R422B with — R22 there will be no harm to the system components or —system efficiency. —Actually there will be an improvement in oil return and operating pressures. — —We know this to be true because in Europe, where —there are —no regulations against mixing refrigerants, our European — —sister company has tracked these developments. — —***In the USA, the EPA does not permit or condone the —intentional mixing of refrigerants. This listing is for a 7.5 Lb. Tank Of Refrigerant R-422b —Refrigerant R422b is the NUMBER 1 “DROP-IN” replacement for R22. — It works even better than R22 and is much more reasonable in cost. There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has. It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler. Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement “DROP-IN” for R22. If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a “DROP-IN” replacement. All that is required that you install the new label on the equipment. This listing includes a EPA approved R422b bael/ sticker. Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system. *The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray) The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene. Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop. (1) 7.5 lb. R422b. Factory Sealed Can. The hose connection is standard, 1/4″ male flare. The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray. ** Canada Customers; Shipping to Canada is with UPS Ground only. You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller. Please contact your local UPS Center to find out what those charges will be. They are located in; Edmonton, AB. Concord, ON. Delta, BC. *They will ask you what the item is (refrigerant) and the “cost” not including shipping. Thank you!
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R22 Replacement, R422B, #1 Drop-In, Ok If Inadvertently Mixed with
R22, Kit B3
An acceptable and safe alternative/replacement for R22.
Our listing is for a 7.5 Lb. Tank Of Refrigerant R422b.
(1) ES Part# 5075, Service port repair kit that includes a professional dual size valve core tool, two brass caps with rubber gaskets and two replacement valve cores also known as schrader valves!
(1) ES Part# 3272 Gauge Kit.
R22 single manifold gauge set for use with this tank
Our Set includes:
1 each R22 single manifold gauge set
2 each 36″ hoses
(1) Low-Loss, Anti-Blow Back fitting, prevents frost bite when hose is disconnected from syste and also saves refrigerant loss.
(1) Model# 4015, Pittstop Pro Series Vacuum Pump 2.6 CFM
**This professional refrigeration and air conditioning system,  2.6 CFM vacuum pump,  is used to evacuate any air and non-condensibles from the system prior to charging the system with refrigerant.
The vacuum pump is not intended to recover the refrigerant from a system, that would be a “refrigerant recovery unit”.
The vacuum pump is used only AFTER the A/C system is empty of refrigerant or on a new installation and is used to pull a vauum on the system to remove air and all non-condensibles prior to charging with refrigerant.
This professional vacuum pump will work with R12, R22, R134a, R410, 404, 407, 409, 502, A/C & Refrigeration systems.
Complete with a 1-Year Warranty
Applications include:
Refrigeration
Air Conditioning (including automotive applications)
Medical appliances
Printing Machinery
Vacuum Packing
Gas-analysis and hot-forming plastics.
FEATURES:
Rotary
High Efficiency
Low Noise
Preventing Oil Return
Perfect Appearance
Good for up to 29″ At Sea Level
120 watt motor
RPM: 1720
Voltage: 110 V, 60HZ.
Weight: 15 lbs. or 6.9 (kg)
INTAKE FITTING: 1/4″ R12 systems or 1/2″ ACME R134a systems.
Features
ONE-YEAR WARRANTY
Oil fill cap
Exhaust Cap
Exhaust Port
Oil Full mark indicator
Oil sight glass for monitoring oil levels.
Oil Drain Plug
Inlet fittings for R12/R134a
On/Off Switch
Line cord 110 vac
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
If you inadvertently mix R422B with
R22 there will be no harm to the system components or
system efficiency.
Actually there will be an improvement in oil return and operating pressures.
We know this to be true because in Europe, where
there are
no regulations against mixing refrigerants, our European
sister company has tracked these developments.
***In the USA, the EPA does not permit or condone the
intentional mixing of refrigerants.
This listing is for a 7.5 Lb. Tank Of Refrigerant R-422b
Refrigerant R422b is the NUMBER 1 “DROP-IN” replacement for R22.
It works even better than R22 and is much more reasonable in cost.
There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has.
It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler.
Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement “DROP-IN” for R22.
If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a “DROP-IN” replacement.
All that is required that you install the new label on the equipment.
This listing includes a EPA approved R422b bael/ sticker.
Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system.
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene.
Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop.
(1) 7.5 lb. R422b. Factory Sealed Can.
The hose connection is standard, 1/4″ male flare.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
** Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
*They will ask you what the item is (refrigerant) and the “cost” not including shipping.
Thank you!
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a “Hazardous Materials Package” with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including “ORMD” Limited Quantities Exemption shipments.
An acceptable and safe alternative/replacement for R22.
Our listing is for a 7.5 Lb. Tank Of Refrigerant R422b.
(1) ES Part# 5075, Service port repair kit that includes a professional dual size valve core tool, two brass caps with rubber gaskets and two replacement valve cores also known as schrader valves!
(1) ES Part# 3272 Gauge Kit.
R22 single manifold gauge set for use with this tank
Our Set includes:
1 each R22 single manifold gauge set
2 each 36″ hoses
(1) Low-Loss, Anti-Blow Back fitting, prevents frost bite when hose is disconnected from syste and also saves refrigerant loss.
(1) Model# 4015, Pittstop Pro Series Vacuum Pump 2.6 CFM
**This professional refrigeration and air conditioning system,  2.6 CFM vacuum pump,  is used to evacuate any air and non-condensibles from the system prior to charging the system with refrigerant.
The vacuum pump is not intended to recover the refrigerant from a system, that would be a “refrigerant recovery unit”.
The vacuum pump is used only AFTER the A/C system is empty of refrigerant or on a new installation and is used to pull a vauum on the system to remove air and all non-condensibles prior to charging with refrigerant.
This professional vacuum pump will work with R12, R22, R134a, R410, 404, 407, 409, 502, A/C & Refrigeration systems.
Complete with a 1-Year Warranty
Applications include:
Refrigeration
Air Conditioning (including automotive applications)
Medical appliances
Printing Machinery
Vacuum Packing
Gas-analysis and hot-forming plastics.
FEATURES:
Rotary
High Efficiency
Low Noise
Preventing Oil Return
Perfect Appearance
Good for up to 29″ At Sea Level
120 watt motor
RPM: 1720
Voltage: 110 V, 60HZ.
Weight: 15 lbs. or 6.9 (kg)
INTAKE FITTING: 1/4″ R12 systems or 1/2″ ACME R134a systems.
Features
ONE-YEAR WARRANTY
Oil fill cap
Exhaust Cap
Exhaust Port
Oil Full mark indicator
Oil sight glass for monitoring oil levels.
Oil Drain Plug
Inlet fittings for R12/R134a
On/Off Switch
Line cord 110 vac
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
If you inadvertently mix R422B with
R22 there will be no harm to the system components or
system efficiency.
Actually there will be an improvement in oil return and operating pressures.
We know this to be true because in Europe, where
there are
no regulations against mixing refrigerants, our European
sister company has tracked these developments.
***In the USA, the EPA does not permit or condone the
intentional mixing of refrigerants.
This listing is for a 7.5 Lb. Tank Of Refrigerant R-422b
Refrigerant R422b is the NUMBER 1 “DROP-IN” replacement for R22.
It works even better than R22 and is much more reasonable in cost.
There is absolutely no reason to pay so much for R22 when you can use R422b and obtain even better performance due to the better lubrication return properties that R422b has.
It operates at exactly the same pressures as R22 and even has a lower head pressure so the compressor runs cooler.
Again, there is absolutely no reason to pay so much for R22 when R442b is the NUMBER ONE EPA approved replacement “DROP-IN” for R22.
If your air conditioning unit of refrigeration system uses R22 you can legally use R422b as a “DROP-IN” replacement.
All that is required that you install the new label on the equipment.
This listing includes a EPA approved R422b bael/ sticker.
Be smart, educate yourself in this field and you will see that almost all techs are using R422b as a replacement for R22 and they are applying the EPA approved sticker on the air conditioning unit or refrigeration system.
*The tank is factory sealed in the new EPA & AHRI required color for ALL new tanks made as of 2020. (Gray)
The hydrocarbon component in R422B helps promote oil return in systems containing mineral oil or alkylbenzene.
Although HFC refrigerants won’t mix with these oils, the hydrocarbon component thins the mineral oil and keeps it moving around the loop.
(1) 7.5 lb. R422b. Factory Sealed Can.
The hose connection is standard, 1/4″ male flare.
The condition is new and the tank is factory sealed in the new, as of 2020, tank color which is gray.
** Canada Customers;
Shipping to Canada is with UPS Ground only.
You will be required to pay your countries Import/Customs charges which are usually collected by UPS and have nothing to do with us the seller.
Please contact your local UPS Center to find out what those charges will be.
They are located in;
Edmonton, AB.
Concord, ON.
Delta, BC.
*They will ask you what the item is (refrigerant) and the “cost” not including shipping.
Thank you!